SPECIFICATIONS OF MOVING COIL PANEL METERS

YOKINS MOVING COIL PANEL METERS (TYPE MR-144 , MR-96, MR-72)

YOKINS Switchboard Instruments are permanent magnet (Alnico high flux density) moving coil type with pivot-jewel suspension. The movement is having high torque to weight ratio and linear one with knife edge pointer for accurate reading. The design and construction of instruments is most modern. sturdiness, simplicity,sensitivity and rigid quality control ensure these movements for high grade performance under adverse conditions of shock and vibration. All instruments are housed in ABS moulded dust proof cases with zero adjuster accessible form the front.

VOLTMETERS

RANGE :


SENSITIVITY :

SPECIAL SCALE :
MULTIRANGES :
30mV -600V (self- contained)
Above 600V with Ext. multiplier
1000 ohms/V
Centre zero. Offset zero
Coloured dials etc.
2 ranges can be provided

AMMETERS

MICROAMMETERS Range 50uA 100uA 250uA 500uA 750uA
Resistance 3000 ohms 1500ohms 500ohms 250ohms 175 ohms
MILLIAMMETERS Range 1mA 2 mA 5mA 10mA 20mA 50mA 100mA 500mA  
Resistance 120 ohms 60 ohms 75mV +/-10%  
AMMETERS Range 1 A -3A Shunt Dimensions are as per I.S:1248
mV 75mV ±10%
EXT. SHUNTS Range 10A-10,000A
mV 50mV, 60mv or 75mV

TYPE FRONT(sq.mm.) PANEL CUTOUT SCALE LENGTH ACCURACY
SR/MR-144 144 X144 138 X 138 155 1.00%
SR/MR-96 96 X 96 92 X 92 92 1.50%
SR/MR-72 72 X 72 68 X 68 62 2.00%

Accuracy and ranges other than mentioned above are also available on request.



Copyright © 2002 - Yokins Instruments. All rights reserved.
Site designed & maintained by Eureka Exim Pvt. Ltd.